Engine Oil Additive Info

Take a good care of your Car

Take a good care of your Car

Shiny and clean the car comes from the dealer. But very soon the road will change this. This allows the external and internal condition of the vehicle not only to draw conclusions about the driver, but also has a direct impact on the resale and the resale value.
Our tips and hints for inside and outside help your vehicle quickly to its former glory.
Spring cleaning
Early spring you can see them again: the long queues at the car washes. However, a short ride through the car wash is not enough to really make frühlingsfit his car. In addition to the thorough cleaning are a few things to check, it covered repairs to smaller and tires must be changed. If you follow some tips, will protect their set of wheels from winter damage and can now drive to the carefree spring.
Basic cleaning – inside and outside
The first step to fresh spring car ride to the car wash. Here one should, however, only the basic program do not, but one that also includes engine and underbody wash laundry. Road salt is in fact a true killer underbody, rust is the result. Recommend a car wash is not with nylon brush works, but with brushes made of microfiber Strip. These spare the paint and prevent small scratches.
Who Convertible is moving or has enough time and leisure, which goes to a designated wash area and engages himself to a sponge and water bucket. Warning: These places have dirt filters and oil separators, thereby preventing damage to the environment. Furthermore, the car wash in the driveway or in nature is strictly prohibited and attracts severe penalties with it. Wash your car by hand, one should not miss the wheel arches forget, as much dirt and salt residue gather here and furthermore one should ever have a power washing the pressure washer to make with as electronic components and ignition in the engine compartment is very sensitive to such Treatment would react.
Is the car washed and dried, seal worth a car wax. This milky liquid is applied with a soft cloth and, after drying, then the powdered residue polishing away with cotton wool.
Next, take then the interior from the car. The main problem of winter is the moisture that gets into the interior. This is due to wet clothes and shoes, snow remains on the floor mats, coupled with the fact that air conditioning is little used in winter and windows closed and remain. Sun interior can not dry quickly, making it a musty odor and mold, at worst rust. The moisture brings you the best with newspaper or microfiber cloth to the body, which one night in the foot spreads about. According to this measure the windows always fog nor should the cabin air filter be replaced.
If the car is dry now, to clean the seats. Fabric or suede seat upholstery cleaner can be foamed with commercial. After this has dried, the seats can be sucked off the rest of the interior together with. For leather seats, a lubricating cleaners are used, otherwise fast small cracks and fractures in the material form.
Now just need the glass, plastic panels and the dashboard cleaned. This is the best window cleaner. One should forget the interior cleaning is not the trunk. Snow, spade, de-icer spray washer antifreeze and other winter accessories are no longer needed and consumes unnecessary fuel.
The boot is cleared out and cleaned, should the condition of the spare tire and look for the content of the first aid kit. During this thorough overhaul of his car, one should also take a look at shock absorbers, vehicle electronics and the vehicle battery. Here we removed the corrosion at the poles and on occasion, the acid density can check.
Paint repair
Mostly we discovered after the small cleaning damage vehicle paint. These arise in the winter especially thrown up by road salt and grit. How to avoid severe corrosion damage, you should now inflict damage with body paint markers on the move. These are available either at the dealership, or even in well-stocked hardware stores. The color code of the coating can be found in his vehicle documents or on a sticker, which is usually in the trunk id.
Check door and window seals
Like to forget when cleaning the rubber seals on the doors and windows, but the wiper blades. While dirty and damaged rubber seals moisture penetration and thus lead to rust and mildew to be defective wiper blades to the real danger on the road. The rubber seals should be checked for damage, then they will be cleaned with warm soapy water and a silicone-coated with care. The wiper blades are the cold brittle made by or used on Eisresten torn through. They should be replaced immediately.
Dampening switch
The winter is over, so it is important that the water of the washing system is also changed. Antifreeze is no longer necessary, but it is worth the use of a water additive, the insects away from the disk.
Tire change is coming
After the winter again reared the summer, as is commonly also says “Summer is gone from O to O ‘(Easter to October). Winter over summer, “The use up” should be avoided, for the following reasons: summer tires are made of a different rubber compound and have a different profile. Thus they provide better handling in the summer, and the rolling resistance decreases. This increases safety and reduces the fuel consumption.
The tire change can be, if you do not own the trusts, little money in the workshop can make one for, in immediately for the correct tire pressure will be taken care of in. Here, you can if necessary also ask whether there is a possibility, the store does not currently required to have winter tires. Many shops offer their customers this service for a small storage fee.
If you switch the tires themselves, we must even for the correct air pressure in the tires also provide. Information on the required pressure is found on a sticker on the driver’s door, in the gas cap or course, in the vehicle documents. To reduce rolling resistance, you should always take the maximum recommended air pressure, even if the car is unloaded. But whether the tires mounted even have been or in the workshop, after 50 km the lug nuts tightened. Prior to the entry of the winter they should be the same damage, dirt and tread depth check up at the next winter-wish-Winter sold out when-not experiencing unpleasant surprise.
Small foreign bodies, such as gravel, can profile be removed well from the knitting needle with a. Caution is advised when a foreign body from sharp metal pins, broken glass and the like exist. Then the tire must be examined carefully whether the sharp objects have damaged the tire. In the tire shop, the technician said quickly whether a repair is advisable or whether the tire to be replaced. For the investigation of the tread you put a one-euro coin in the profile. Is gold edge to see nothing more of the sufficient profile for the next winter from that. More precisely, we can determine the profile with a tester, an instrument, the hardware store for less money is available in each. The tread depth should be at least 5 millimeters. If this is checked everything, you can store the tires: a dry place, lying down or in a so-called tree hanging on rims. Before storing it marked on the respective winter tires with chalk the position of the car.

Cabrio Care
What is important when the convertible top care?
The time of the latest convertibles breaks at the end of winter. Convertible tops had to endure a lot over the season, so now is a thorough maintenance and repair minor damage first duty. The care can be easily accomplished alone, more damage you should quickly leave a professional for repair. Minor damage to roof and windows can be but with little technical skill and the “How to get” even in the grip
Softtop and Hardtoppflege (pre-cleaning, cleaning & waterproofing)
The maintenance of the soft tops (textile hood) is more complex than the hardtop (fixed roof made of aluminum or plastic). With the hard top roofs are either permanently mounted in use, which are removed when needed, or, in newer cars, to the body fixed to roofs, which can be folded in a few segments in the trunk. Hardtops are usually cleaned like the rest of the body. Otherwise, the joints of the roof of the rod are cleaned and lubricated, the top compartment is drained and washed regularly. When the cleaning of soft tops proceeds as follows: In the pre-cleaning dust and dirt are washed off. Here the use of clear, lukewarm water is recommended, the use of high pressure lamps should be avoided because it destroys the impregnation. In the subsequent cleaning residues are insects brushed out carefully and with a soft brush in straight lines, always in one direction. In the transition to the sheet, make sure that the paint is not scratched. The (solvent) detergent, preferably dishwashing detergent or soap should be distributed carefully and sparingly, otherwise a penalty spots. Now the seals on the windows and frames are cleaned. After cleaning, rinse with warm water and the deck should be in the open (in the shade) dry well. In no case shall the canopy in the wet state can be opened, because the formation of mildew, and creases. With plexiglass or Weichkunststoffscheiben delivers a polished best cleaning results. Dust and dirt act like sandpaper on here, namely, the roof-bearing surface and therefore should be removed periodically with a soft, damp cloth. The seals are then treated with a rubber care product. Maintenance of the linkage does not differ to the hardtop. The impregnation is to be renewed approximately every four months. It should be before the date of purchase warrant, however, whether it is suitable to be treated for the top, there can be, for example, wax-containing polymer means dark tops with time fade considerably. When impregnation is essential to ensure perfect cleanliness of the areas to be impregnated, otherwise sealed with dirt and then are almost impossible to remove.
Washing machines: What is important here?
It should be noted that the hand cleaning is the preferred car wash. Plastic covers can, provided that the operating manual of the car provides otherwise, be washed in the washer, preferably in a plant are not working with brushes, but with fabric strips.
Special deck cleaners: How good are they?
Special deck cleaners are needed only for particularly dirty. There are different cleaners for plastic and fabric awnings. Also, for stubborn stains, there are special products. In the application, however, caution is called for, as can occur with misuse bad surprises. Household cleaners and stain removers are taboo!
Rubber and glass care
The rubber seal keeps it smooth with silicone-based care. Plastic discs you should regularly-as described above clean. Nevertheless, they are not in the course of the years better. Light scratches can be polished with special products now on the scratch-out distance, for example, polishing pastes on the market for mobile displays are available, which are also ideal for convertible windows. Is the glass cracked, scratched and discolored, you should think about renewing entirely possibly the hood, as a disc changes alone are sometimes not worthwhile. To conserve disk, there are special trading schooner glass that are placed when you open the hood below the disc. It can act this is covered with foam cushion material, with some skill you sew yourself. Resourceful convertible owners have discovered, however, that satisfy the so-called “pool noodles or pipe casing made of soft foam the same purpose.
What to do about cracks in the fabric top?
If cracks, the car upholstery, the first address is to receive assistance. Anyone that owns a degree of craftsmanship, one can try to repair small tears. There are special roof-repair kits for fabric or PVC roof system. It is generally id from cut to size repair pieces in various colors and highly heat-resistant adhesive. But it is also without these “professional” repair kits. For the repair is needed: cleaning solvent, water-resistant, permanently flexible adhesive strength, adhesive tape and clothespins. First, the surfaces to be cleaned residue with benzene. (Before cleaning, please make sure in an inconspicuous place!). Now the deck are bonded. A popular adhesive manufacturer has an adhesive in the program, which is waterproof and elastic. This is important because rain and vibrations are high demands on the adhesive. The adhesive is (applied as per instructions) to fill the bonding surfaces, and these are then fixed with adhesive tape and clothespins. After adequate drying then adhesive tape and staples are removed, rubbed off adhesive residue.
Discoloration or fading
If the substance of the hood faded or stained, it can be dyed with special funds from the aftermarket. Even a recoloring is the top color is no problem. is to look for in the products the following properties: color, care, impregnation, wash resistance and abrasion resistance
What is important in the winter?
Should we assume to be convertible in the winter, the shelter should be dry and well ventilated. The hood is close, but the windows must remain open slightly. The tire pressure should be increased slightly and to the battery, a battery of so-called trainers are connected. This loads and unloads the car battery and continuously simulates the normal driving. Winters not the convertible in the garage in winter but will continue to be used to note something: The plastic rear window must never freigekratzt with the ice scraper, but be careful with the Enteiserspray free of ice. This in turn may not reach the substance of the hood. In addition, note that frozen at minus temperatures and the deck is in the bright sunshine, and therefore must not be opened, otherwise it could break the material. Before the winter of course a conscientious impregnating and lubricating of all rubber parts is, of course. Possibly you can also inquire whether the manufacturer of the convertible model also offers a hard-top, as this would probably have a heated rear window made of glass. This would then allow ice scraper again and it would penetrate less moisture into the interior.

In winter car care
Is your car ready for the winter?

In winter car care is often neglected. Snow, dirt, and aggressive means attack the paint, the mechanics and the electrics very violently.
How can you best car in the winter from the environment to protect his and which details to look for?
Winterfit

Firstly, you should before the winter the car thoroughly clean the still winter and strength to control. By cleaning to prevent that debris in the run attaches and influenced by snow, road salt and dust themselves in paint and metal einfrisst.
It is also recommended rubber seals, moving parts, such as door hinges, control and door locks and wait if necessary. Rubber gaskets should be sprayed with silicone oil. This prevents the formation of cracks and makes the rubber more resistant to low temperatures.
Furthermore fluids is to check the status of all in the car and determine their winter suitability. Coolant, engine oil, and of course the cleaning water must endure freezing temperatures, only not, above all, they must be of sufficient quantity available in. It should not be in the wrong place to save and high quality brands for cheaper vendors do without. Quality has now times its price. Frozen pipes and thus may pose risks should not be underestimated.
Nano sealing
If one has checked the car, cleaned and refilled all, one is spoiled for choice. In many places, be offered called Nano sealing. Especially in winter, this treatment will bring numerous benefits.
When Nano sealing the vehicle, in some cases completely, covered with an adhesive fluid, which then dries and then polished wird.Es are different types of applications and the Nano sealing. Sometimes you can even do it yourself.
The complexity of the process should not be left out of eight. Best to let a professional to seal the car. You pay in the end only marginally more confident and the quality of the result.
A Nano sealing allows water, dirt and other substances on the vehicle less any liability. the so-called lotus effect bubbled through dirt and grime from the car from a formal, nothing sticks. So you have the car wash less often and the paint is protected.
The wheels and chrome parts benefit from sealing.
When the car windows Nano sealing also has a meaning. Water runs off faster and more efficiently on the discs. The visibility is improved substantially and the safety and comfort are increased significantly. It should be noted however that most of the discs separately, and other means to seal with an are. This work should be a specialist can make just as good visibility is essential and important to a faulty seal could have very negative effect one.
Now you have prepared the car. Everything is controlled externally, is sealed inside all winter. A few dangers of winter, one is still not filed.
Getting through the winter
Freezing rain, snow not only makes the road Icy, he can complete the car with an impenetrable layer of ice cover as well. Freeze solid doors, locks can not be more open. In such situations, it should be a small bottle of a lock defroster it always have to.
In a very short time, the lock is freed from the annoying ice and you can open the door again.
is best tackled not with the ice scraper, the slightly unsightly marks on glass and lacquer discs can cause Vereiste, but with a de-icer spray, a few moments, even the thickest ice thaws in.
It is also advisable in the car a snow brush with long handle carry. If the vehicle is sometimes snowed heavily, helps the brush to remove the snow from the roof. This will avoid the snow slides in maneuvers on the windshield and obscured the view or hide the man behind.
To avoid frozen and fogged windows
Tip from reader

Always use the lever to provide fresh air, unless one heats minus 15 ° C in the car on, but then only as long as nötig.Grund: The air in the interior is in circulation through the human breath always damp and mists / condenses on the cold slices.
Blower at level 1, the temperature inside the controller and not always adjust on / off the blower. Reason: A minimum throughput of air is necessary for fresh drier air into the car and push the old in the back window of the forced ventilation rauszujagen. If after heating up too hot, heating controls and colder place the blower can be turned on.
Slices kept closed while the blower so that air is forced to flow through the entire carriage.
wet weather, rain and cold temperatures combined with air heating run at, because they dehumidify the air.
Winter Spüliwasser brush the slices with the then consists not so fast the dirt from the disc on. The dirt also favors the shoe.
However, should the car stay the night humidity: a bag of salt (about 2 kg fresh daily to the car set) -> withdraws moisture
Conclusion
Even before the onset of winter should be cleaned thoroughly and vehicle control. This prevents you unpleasant surprises afterwards.
Also recommended a nano sealant. It not only protects the paint, thus ensuring a better value preservation of the automobile, sealed windows improve visibility and increase safety.
Furthermore, one must correct winter equipment they carry. Schlossenteiser should dabeihaben at best. In the car should not be missing and Windscreen snow sweepers.
If you think of this advice and invested some time and money in the preparation of the vehicle, winter loses much of its terror. Both the car, as well as the nerves and the purse are also spared.
Car Interior Care
Notes to thoroughly clean your car.
Every car owner has ever experienced such a situation. As it is taking a weekend family outing with the children and on Monday you’ll experience the unpleasant surprise. The car interior is totally dirty, smudged the windows and the cushions have also seen better days. In such cases, an interior cleaning is called for.
Basic cleaning
Before the individual cleaning stages dare to come before the thorough cleaning with a vacuum cleaner. Previously, to remove any loose parts that can be absorbed and possibly with the foot and floor mats. After the bags are thoroughly ground, and the upholstery, as well as the storage space and aspirated. Especially when the seats are sure that it also sucks in the cracks, since this is where the main dirt deposits. Before the mats again puts the car in, they will be tapped and sucked away. The Staubsaugvorgang That concludes not. Also the trunk must be vacuumed regularly. There should also take out the removable shelf and up under the spare wheel suck. This one should use the same way as on its functioning, to check the spare. Then begins the second cleaning stage.

The simplest method of choice has become a normal household cleaner proved that water is dissolved in warm. With a soft cloth – preferably suitable microfiber cloths – windows are all plastic parts such as cockpit, arms and wiped away the wet. With a second cloth then dried. The windows and the interior mirror can be a conventional window cleaners and household wipes the easiest and most thorough clean some.
Upholstery cleaning
The cushions need special cleaning. If these are dirty even more, it is advisable to use an upholstery cleaner on a foam base. This is sprayed onto the cushions and then the foam padding incorporated into the brush means. After a certain contact time the pads are removed with a vacuum cleaner. In this manner you removed the dirt from the depths of the cushions.
Since the cushions get wet here, should such a deep cleaning only one carry in the warm season, maybe because the humidity in winter and dries it so mold can come to.
Even the floor mats can be cleaned this way on. Only here will be used instead, a carpet cleaner.
What types of cleaners should be noted that in that the color of the substance may possibly impair. It is vital, therefore, read the instructions and cleaner first on a small inconspicuous area to test.

For special stains in the upholstery should be selected cleaners or resort to tricks of the housewives. Children like to chew gum and it moves quickly to the pad, where he correctly sticking Sun chewing gum and other viscous materials are best removed, in which one it briefly with an ice spray einsprüht that freezing the Sun In this way, the chewing gum can be scraped off so easily by the cushion. Even chocolate is easy to remove Sun Important thing is not that these places after the scraping with a wet cloth and dabbing it rubs on it. Into the dirt because that is rubbed into the fabric.
Leather Cleaning
Many cars have a leather interior. Leather seats are the easiest to start slightly wet wiped. It is important that the leather is dried again before moving on to further treatment. After the wet cleaning and drying, there are special leather care products, with which the leather of the seats and car interior are treated. These are usually products that keep the leather supple and preserve it from cracking and so protect it. It should be noted here that one leather care and evenly in a single pass of the plotting. Could stain the leather seats are ugly avoided. This is especially noticeable in very bright leather products. Here, too, is that one of the care product previously on a small, hidden area tests to make sure that the color and the leather does not alter negative.
Interior plastic cleaned properly
Finally, we still maintain the cockpit or the plastic parts inside the vehicle. There is this so-called cockpit sprays, which simply taps after cleaning the einsprüht. Are better suited, however, pastes and creams, soft cloth which will be applied to the cockpit with a . In the care should be taken that this move quickly and not leave a dry and lubricating film.
As for cleaning must not be forgotten is the maintenance of the door seals with wax and oil products, so that it does not freeze in winter.
Before the car moving again, should make it good to aerate, so that no more moisture in the cushions, rugs or other interiors present.

How often has this way to clean the car this depends of course on the use of the vehicle. A complete cleaning of all the above points should be in the spring, summer and autumn. Otherwise, every two weeks to absorb the interior and wet wipe. The windows should be cleaned every time, because they ensure that the driver has a clear vision.
If you car does not even clean or may not find time for professional cleaning can for car interiors might call it. It is his car from there and according to the contract brings to his car, inside and outside top cultivated again.
Car Care
The cleaning of one’s own vehicle is a science for many motorists. The science is so essential in fact, manageable steps to get the best result. The road to the car wash is definitely the most convenient, but the result is often not optimal. In addition, the prices are usually called quite steep and in the worst case results in the much-loved vehicle even damage. Cheaper and better it is, then, if you simply grab a bucket and even a marketing assistant.
Car Wash
Those who always washes his car in the car wash, which should at least ensure that the investment trusts in a gentle textile cloths. The conventional bristles dull after many washes off and cause minor scratches on the paint. These are especially visible in the sun and are simply unnecessary. Often leave the car wash operators to realize bristles longer in use, finally, they also want to cut costs.
A car wash is going soft textile and caused solely by the construction of any scratches. However, there is also no guarantee for it, finally, the predecessor have had a very dirty car. Beautiful then small particles or pebbles from the cloths are massaged in the paint. In this case, liability is not even of the operators.
Furthermore, care should be taken when using a car wash on the necessary ground clearance and maximum vehicle height. Vehicles with a deep-laid vehicle can be cleaned only in plants that have no surveys. Particularly high vehicles have to resort to car washes that do for trucks.
Hand wash and polish
The better off everything when you wash his car with his hand. One should also note a few things that otherwise makes you look more work than necessary.
The best start is made at a wash box with a pressure washer. For a few euros you can free his vehicle from the rough dirt and free, especially in winter, the underbody from dangerous salt. Special wash programs already provide this wash for streak-free shine. On the growth or using a foam brush should do without it, however. The former is not to compare with a good car wax and also the dirty windows, similar to the second car wash scratched the paint. The handle to a sponge and bucket is also possible, but can also cause scratches and is prohibited also on the road. A trip to the washing area so inevitable.
If the vehicle is clean, it must be of second-. With a soft cloth remaining dirt particles to be wiped from the paint. At the same time it looks like whether some jobs need more intensive treatment. If the vehicle is dry, the car in general is like new. A car wash the other hand, always leave water spots or streaks.
The result is rounded off with a wax seal. In the liquid wax is applied with a dry cloth to clean the vehicle and after a short drying again polished away. To each soft cloth or microfiber cloths are suitable. Depending on vehicle age and Lackzustand a normal range without polishing wax particles. Weathered or faded paint should be treated with a polish. Thus, an ink layer removed, thus intensifying the color again.
Besides the splendid sight, is a waxed car also far less susceptible to new pollution. Rainwater runs off and washes off easily with contamination. Small water droplets after the rain to prove the good condition of the car wax. Quite enjoyable, in addition, that bird droppings or insect residue can not burn so easily.
Sealing
If the vehicle after cleaning is still dirty or has easily formed rust or tree sap on the paint, then there is special paint cleaner in stores. These cleaners dissolve the rest and also take up remaining wax. After treatment, the paint is complete again virgin, however, a subsequent sealing with wax needed.

The vehicle is to shine but not only, but also in the interior make a good impression. First, you should suck the car and knock off the floor mats. With a plastic cleaner can freshen up the colors again. Besides, take anti-static cloth to the last dust. For vehicles with leather upholstery, we recommend a special leather cleaners. This also refreshes the leather color, thus providing for a longer preservation of the new state.
Cleaning the windows
The cleaning of the discs for most horror. Finally, we think of when you brush: Wow, the disc is clean again. The first solar radiations or unfavorable light of oncoming traffic can see again strip. There is no panacea, it does not, but you should never clean the discs in the blazing sun. At best it is in a garage or on cool days. Warm slices also promote the formation of streaks. As cloth is also a microfiber cloth or a soft paper roll. The advantage of the microfiber is the absolute freedom of booze.
Conclusion
The car wash takes one if you want to do it carefully and well, more time than going to a car wash. Ensure the car stays on for a long time without any artificial scratches.

Loan Lender – Take the extra mile: Fuel efficiency tips

Increases in the price of gas, accompany the increase in the number of fuel-saving scams.

Continuous increase in the price of gas is common news nowadays. This is accompanied by an upsurge in advertising exposures for “gas saving” gadgets. These products attract potential buyers searching for methods to maximize fuel efficiency.

Hector Milla Editor of the “Direct Auto Loans Lenders” website — http://www.DirectAutoLoanLenders.com — pointed out;

“…There are important procedures car owners can take in consideration to improve gas mileage.  According to the Better Business Bureau, the public should be critical in assessing products that claim gas saving features for vehicle devices or additives for gas and oil…”

There are products that feature gas-saving features that really work.  In addition to that, consumers could be facing a major engine trouble or a nullified creator’s warranty by putting devices to the engine.

Consumers should be wary of these specific advertising slogans: “20 percent fuel efficiency improvement”

A hundred or more devices that feature gas-saving qualities are proven untrue by the Environmental Protection Agency. Worse, there are so-called “gas-saving” devices that may cause a harmful effect to a vehicle’s engine.

Another side effect is more smoke emissions. Examples of these devices are Engine Modifiers, Additives, Fuel Line Gadgets, Liquid Injection, Vapor and Air Release Devices and a lot more.

“Get an additional 4 miles for each gallon with this product”

Consumer testimonials are common in fuel saving ads. Assuming these testimonials are not made up, few consumers test the fuel consumption of their vehicle before putting on the gadget. Therefore, an objective comparison of the fuel consumption before and after the product was added will not be attained.

“Federal Government Approved”

Keep in mind, a government agency never endorses fuel saving devices. Although EPA has assessed potential gas savings but first the product should be evaluated and tested.

The alternative in looking for gas-saving devices, the BBB suggests that the public should take into consideration doing more than one activity that can help conserve gas. The vital way to begin is to concentrate on the gas pump. The consumer should buy only gas as needed. Make sure to review the car manual to know the proper level of octane of the car.

The following are practical tips to conserve gas:

Efficient driving

Just drive reasonably within the speed limit. Remember that speeds of more than 60 miles per hour increase fuel consumption.

Do not do sudden starts, accelerations and stops.  Acceleration should be done gradually. The gas pedal should not be stepped on more than one fourth of the way down. This will allow the engine to function most efficiently. Gas conservation could reach up to 5 percent if sudden stops, jerks and accelerations are avoided.

Make use of gears for overdrive and cruise control as needed. Fuel efficiency is attained when moving on the highway.

Windows should be closed on highways. Windows that are open can create air drag that can decrease the fuel consumption by 10%.

Rough roads should not be taken as much as possible. Dirt, bumps, rough roads and gravels can cause 30% increase in fuel consumption.

Take out unnecessary baggage. The trunk should be kept clean, any gadget, tools or loads that are not needed should be taken out. 100 pounds of extra baggage can affect fuel economy by two percent.

“…The car should always be maintained. The engine should be given a regular tune up, the tires should always have the right air pressure and efficiently aligned, the oil should be changed when needed and air filters replaced regularly. Clogged filters can affect gas consumption adversely by up to ten percent…” added H. Milla.

Turn off the engine whenever there is an opportunity. Idle engine wastes fuel. There are instances where the engine could be turned off; stopping for gas, waiting for someone, changing tire pressure, caught in traffic and a lot more.

Engine warm-up fuel conservation tips:

Lengthy warming up of the engine should be avoided. 30 to 45 seconds should be enough time.

Check if the automatic check is removed after warming up the engine. This is usually stuck which could usually cause poor gas and air combination.

Do not rev the engine. This is usually done before turning off the engine. This causes unnecessary fuel loss and also washes the oil within the cylinder walls. As an effect, there is air pressure loss and consequently fuel loss as well.

Further information about trusted and reputable companies for cheaper auto loans and car loans by visiting; http://www.LowestAutoLoanRates.net

Engine Leaks Take a Brutal Toll on Cars and Car Parts

If you own a car then you have probably already had some experience with car leaks, at least to some degree. Even new cars can develop leaks that are both annoying and frustrating. In the 1980s and 1990s engine leaks and other automotive leaking problems were the cause of a large majority of auto service appointments.

Now there are better engineering designs and materials used in the automotive manufacturing process. This has resulted in a decrease in customer complaints because new car parts have been noted to have substantially less problems with leak malfunctions.

Keep Engine Leaks at Bay

For those of you that may be unfamiliar with the basics of engine seals here is a list of what a car engine needs in order to be leak-free.

1.      Motor oil

2.      Proper compression

3.      Fitted gaskets

4.      Intact seals

5.      Engine coolant

6.      Fuel

Understanding Engine Seals

Most of the seals that protect your car engine are designed with double lips so that the motor oil can not leak out. One of the seals is designed to contain the oil, and the other is meant to stop any debris from contaminating the oil system. Although these lipped seals do not move they still have a big job to do because the car parts that they are surrounding are in motion. This is why many automotive techs refer to these car accessories as dynamic engine seals.

You will find dynamic seals used on car parts that are either rotating or belt driven. Two examples of these are crankshafts and camshafts. These are crucial elements for your car engine and it only takes a small leak to create a great deal of damage. An oil leak from a camshaft seal can result in ruined valves and timing belts which are both costly repairs.

How Leaks Begin

Small bits of grit, dust and road dirt are always flying about the exterior of auto engines. If there is a small opening in any seal it can allow some of these contaminants to adhere to the inner surface. Then as the shafts are moving they are being abraded by these particles’ sharp edges.

The constant motion of these rotating and belt driven car parts will soon cause small grooves to form along the sides of the shafts. Now the integrity of the seals and shafts are both compromised. Once these irregular grooves have formed on the metal surfaces, leaking will soon follow.

Fixes for Seals

There are times when worn metal surfaces can be repaired instead of being replaced. Some mechanics are able to grind and weld the shafts until the surface area meats the necessary specifications.  There is also a slip-sleeve that is available for some front crankshafts. This product is a fine metal covering that can be applied to the damaged area and will then cover the grooves. These are both elaborate and high priced technical projects that are only suggested for ultra expensive vehicles. Car parts such as engine seals and shafts can be replaced at a more affordable cost.

Gaskets and Engine Leaks

In the past a lot of car accessories and engine parts used gaskets that contained cork. The cork would work for a while but it deteriorated at a relatively quick pace. This material would stop a leak by swelling up and forming a tighter seal, but only after a small amount of oil had leached into the gasket.

Another type of engine gasket was made from RTV silicone and this could create a secure seal but only under special conditions. The silicone base meant that it had to be applied to an engine surface that was absolutely clean and free of any oily residue. Many mechanics had trouble getting the metal surface prepped to these exacting specifications.

Most of today’s new gaskets are made form synthetic rubber compounds. These engine gaskets are reliable and are much less likely to form a leak. This is the type of gasket that is preferred by knowledgeable mechanics and auto enthusiasts.

Gasket Seal Problems

When placing gaskets onto surfaces it seems that many auto techs and mechanics tend to tighten them too much. In order to address this problem there are some newer designs that use metal spacers. These spacers are actually in the gaskets which helps prevent the over tightening seen in the past. Newer car parts such as the cast aluminum engine covers and those made from plastics have also been responsible for protecting gaskets from this common problem.

There are also some gaskets that are more likely to be the source of engine leaks even if they have been properly installed. A car’s head gaskets and those used on the intake manifold are the ones that should be checked first if an engine leak is noted.

Internal Manifold and Head Gaskets

Engine compression, coolants and oil all depend on an intact head gasket seal. The intake manifold gaskets that are on cars are responsible for insuring the integrity of coolants, gas and diesel fumes and air. If these seals are damaged, or compromised you are assured of having leaks from your car that are going to be noticeable.

Engines and Aluminum Car Parts

The fact that so many engine car parts are now made from aluminum is an additional problem. Because of this metal’s expansion and contraction the gaskets must be allowed some movement allowance. This means that a mechanic needs to make sure that when the repairs are done the gaskets are capable of allowing for the movement of internal car parts as the temperature and weather changes.

Torque to Yield Bolts

Gaskets are internal car parts and they are placed in areas where bolts are going to be required. A mechanic can use incorrect bolts or too much torque and this will result in gasket failure. In this type of situation there could be a compression leak or coolant leak from head gaskets as well as warping of the heads. To prevent this from occurring most auto shops are now using the type of car engine bolts that are known as “torque to yield”.

Check and Repair Engine Leaks

No matter how old, or new, your car is you will need to check on any type of coolant engine leak. Just 2-3 tablespoons of an antifreeze liquid seeping into the oil compartment could ruin some vital car parts. Antifreeze and oil is a mix that can ruin the bearings in any car engine.

If you do not want to take your car to a garage you can handle the situation yourself. Certainly there are many different products that you can use to repair gaskets and seals. Your mechanic or auto supply store can help you find the right one for your vehicle. Just remember if you are doing the repairs yourself you need to make sure that you are using a quality product and applying it correctly. Follow the specifications and make sure to clean the surfaces properly and have exact alignment before making the repairs.

Find More Engine Oil Additive Articles

How To Take Care Your Automobiles In Winters

Cars need to be maintained and looked after for smooth use.  It is important to look after your car and care about the same in winter season.  There are many factors which lead to damage and destruction of car engine parts and body in winter times.  And if not maintained, can lead to short life of your machine.  It’s very compulsory to begin with the preparations on the offset of season. Firstly, it is often that cars economy fall during winter season so to run your car in optimum level, always change engine fluids in low temperature.  There are many cases when the engine fluids and oils freeze or don’t work in winter.  So look for the best oil for your car.  Moreover, bends and joints in engine parts should be well greased so as to retain them soft even in harsh temperatures.

Tires of cars are also a concern.  Tires are made of rubber and the rubbers life is very short in extreme temperatures.  Snow surfaces cause damages to car tires.  It should be made a practice to look at surface before parking the car whether it’s under snow or clean.  Avoid parking in such spaces.  It is usual experience for almost all drivers during winter season that cars make some creepy sound.  The noise can be felt on brake or at curves due to water split into the wheel drums.  Lubrication and dryness for the car is hence necessary in winters.The glassware used in the cars as windshield or door windows is tough enough to bear high as well as low temperatures.  The windshield and the door windows can experience frozen ice layers on surface when parked in open area for long duration.  Using hot water to clear off the glasses is not a good idea indeed.  Better alternative is to use heater in car directing inwards windshield.  This way is suitable and not time taking also.  On further concerns, buy special winter wipers for the windshields.

Make sure that the car roof is free from snow heaps to avoid roof dents.  This can hence cause body dents.  Make sure to get the scratches or dents on car body right before the first drop of rainy season.  Body corrosions can expand on the contact with water so better treat it before the season arrives.  Always cover the car body with some winter wear Cover your car with some clothing.  In this way the body color retains well.  Use special creams and sprays for winter maintenance. Accessories and extras of the car also need some attention in winter seasons.  Like neon lights and headlights attached to car need to be covered with some guard.  Radio antenna should be put off in jack during snowfall.  This is how you can save your machine from suffering harsh cold.

Related Automobile Oil Articles

How To Take Care Of Automobile’s Engine

A car engine is the soul of a car. If there are certain problems with the engine of a car, will affect the life of your car. Like our body needs vitamins and other nutrients to maintain a healthy body. A car engine is the need for regular maintenance so that there will be no problems or damage occurring in parts of the car engine. In the engine of a single car, there are more than 40 parts maintenance needs. But above all, is used to change the engine oil of the machine. Because motor oil is one of the most important things that determine the performance and life of the car. Should be checked regularly at least every two weeks or before a long trip. Check the regular motor can protect your car engine will also protect your life as a driver. Because if a problem is occurring motor insurance while you’re driving, can cause traffic accidents due to engine failure of his car. By having a long trip, first check the car’s engine then proceed to other parts of your vehicle, such as transmission fluid, brake fluid, power steering fluid, radiator coolant, windshield washer, and the tires of his car.

As we focus on automobile engines, here are the tips on how to keep car engines: Follow up with regular oil change oil, because change is the most important factor to keep the engine running flashy. If parts are themselves the damage phases, the change before it was made a [problem in your engine. For example, plug in your car, air filter and timing belt are in my little role and must change before it affects other parts of the locomotive. Another attempt to avoid overheating the motor. Because once the engine to overheat, causing serious damage to your engine as well as in parts of your car. And for added protection in your vehicle regularly to make sure that small problems and will try to fix it immediately before it becomes serious problems or damages. In the protection of your vehicle while driving, keep in a secure unit and keep on driving your vehicle properly. What I mean is, not simply to increase a little gas and make some unpleasant changes in art. Check also if the engine is not running without problems. The drive smoothly, do not let the engine have fits, it may cause overheating. Before a long trip, rest and relax for the engine of your car will have a break too. Then, before entering the long term, again, check your vehicle again as part of their maintenance and, if there are any problems, fix, or has some solutions with the help of some persons in a position to solve their problems with the car. You always remember that once the car engine has a problem; continue to affect other parts of the car engine. Therefore, the best way is to have a proper and regular maintenance in order to keep away from a costly repair.

Find More Automobile Oil Articles

Engine Tips – Take Care of the Engine that Takes Care of You

People rely heavily on their vehicles. They expect their cars to take them where they want to go and bring them back safe without missing a lick. They expect them to go when conditions are good and when they are bad. They expect them to do be more reliable than many people ever are. However, people should only place this much trust in their vehicles when they are doing their part also.

Proper maintenance and tune-ups are necessary for any car that is going to be used much. If a car is not properly maintained, things may go wrong at the worst possible time. And then you will have no one to blame except for yourself.

Proper maintenance should be exercised on any type of engine. It could be your car, truck, motorcycle, boat, or airplane. Bottom line is that if you don’t take care of it, it won’t take care of you. And in some cases this could mean a fate worse than being stuck on the side of the road for a while.

Proper oil changes are the first step to keeping your engine up and running properly. You should pick an oil brand that is high quality and stick with it every time. Don’t try to save money with the cheap, less expensive kind. You can have your oil changed professionally, or you may be able to do it yourself. In many cases, you save money by doing it yourself. However, it can be such a small amount that many people don’t find it worth it to do it themselves. Also, doing it yourself can sometimes void warranties on an engine.

When you change your oil, you should also change your oil filter. A good oil filter can make a lot of difference to the engine. Sometimes the manufacturer of an engine will suggest you use their brand oil filter over competitors. If the engine is under warranty, you may have to. Otherwise, you should inquire what the differences are. There may or may not be a significant difference.

Some engines, such as many motorcycle engines, are air cooled. This means that the wind is what keeps the motor from overheating. Most engines have a means other than the wind to keep the engine cool. You should always make sure that you have the proper amount of coolant and water in your engine. It is especially important to check when it is hot, or the whether has just changed. Overheating your engine could ruin it, so it is vital to take care of that.

In addition to oil changes and adding coolant to your engine, there are many other things that should be done periodically to ensure more usage from your motor. This can include flushing out the old coolant and adding new. It can also mean changing your spark plugs for new ones. It also means checking to make sure parts are still good before they go bad.

More Engine Oil Additive Articles

?check Engine Light??what it Means and When to Take Your Car Into an Oil Change Business

If you’ve driven a car that’s been built in the last 15 years, then you’ve probably noticed the check engine light. On most cars, it’s a tiny light on the dashboard that displays the silhouette of an engine. And if you’re like most people, you’ve probably seen it light up at some point while you’re driving.  

But what does the light mean? The light usually only says “check engine soon” or “service engine soon”, and that’s pretty vague. So what’s the next course of action when that little light invariably lights up? Usually, you can have the employees at an oil change business look at the light—they may be able to help. 

But first of all, let’s talk about the purpose of the engine light. It’s there as an alert to a range of potential problems that an oil change business may be able to handle. The light is the indicator of a system that overlooks a bunch of aspects that keep a car running smoothly. Some include the emissions system, the power train system, and the fuel injection system. And on some models, the check engine light may also be monitoring things like tire pressure, suspension systems, and even the electronics systems that help keep an automobile running smoothly. 

So what do those have to do with the engine? After all, the light is in the shape of an engine. But the first thing to remember is that the problem isn’t always under the hood. That could be good news, since the common non-engine troubles are often easier to fix at an oil change business than something engine-related. Electronic systems were first added to engines in the 1970’s, but it wasn’t until the 1980’s that system monitors were implemented. In most cases, those new systems, which were minor, were simply latched onto the main monitoring system, the one that flicks on the engine light. And it’s been the same ever since.  

So what does the light mean then? There are three main categories where your car could be experiencing problems:
1.        The emissions system
2.        Your car has just passed some pre-set amount of time for servicing.
3.        A component that affects the safe operation of a vehicle is out-of-whack.  

Emissions System
The emissions system is one of the most complicated parts of an automobile. There are several  little-known things like the exhaust gas recirculation valve, positive crankcase ventilation system, air pump, charcoal canister, catalytic converter, oxygen sensor, and muffler. 

If you’re a normal driver visiting an oil change business, most of these systems are completely foreign to you. But that’s ok, most of the time. These days those things are monitored by advanced and precise electronic systems. But when any of these systems find something wrong, then the light goes on. 

Nowadays gas caps are air tight in order to keep fuel from evaporating. And most cars have sensors that can detect a gas cap that’s not attached. This is the easiest problem to fix when the engine light goes on, and thus should be the first thing to check. Sometimes just tightening the cap is enough to get the light to shut off, so check that before you take the time to head over to an oil change business. 

Service Reminders
Some auto companies use mileage or time as a good system for reminding you to take your vehicle in on a regular schedule. But some cars have a built-in system that is a part of a vehicle’s engine control unit that can track a range of things related to engine performance, and will know when it’s time for servicing. Sometimes the engine light switches on because all you need is to visit an oil change business for a change. And sometimes it’s just telling you that the car’s not running as well or as efficiently as it could, and that it needs to be taken to an oil change business for servicing. 

Safety Components
There are several other systems that monitor the safety mechanisms that are built into the car. They can be pretty complex, but there are generally two things that are most common when it comes to triggering the check engine light.  

The engine light may mean that there’s something wrong with the brake system. Brakes are in constant use and they tend to wear out over time. Some cars will let you know when those brake pads are getting ground down a little too much and it’s time for a new set of pads that may be available at an oil change business.  

The other important safety system that can be behind the engine light is the transmissions system. Once called the gearbox, the transmission is closely related to the engine but often has its own computerized monitoring system. Any problem along the sensors could set off the engine light.  

Those are the most common problems that can cause the engine light to switch on. But that’s a lot of problems. How are you going to know what the problem is? Even if you know a thing or two about cars, it can still be time consuming. The best and safest way to deal with the engine light is to take it into an oil change business… after you try tightening the gas cap that is.

Find More Automobile Oil Articles